Brand: AOC
VE MOULD GELCOAT
Neogel® 8393-W-XXXX spray gelcoat has been developed especially for the manufacture of moulds. It is recommended specifically for moulds subject to elevated temperatures in the production cycle and when high production rates are required.
For further information on the brand,quality,environmental protection,and safety concepts of our products,Please consult our sales engineer team！
Please contact us to serve you!
Neogel 8393-W-XXXX
Neogel® 8393-W-XXXX has a combination of important characteristics: Easy application, very high gloss and Barcol hardness, superior mechanical properties and exceptional styrene resistance especially at elevated temperatures.
Application Characteristics
Neogel® 8393-W-XXXX is pre-accelerated, ready for use. It can be cured with standard MEKP (Butanox M50 or equivalent),
without any foaming (microporosity), which is typical for many traditional vinyl ester resins. The gelcoat has excellent spray
properties and can be applied with conventional spray equipment with the following recommended settings:
• Spray gun: nozzle ∅ 2.5-3.5 mm, pressure 4-5 bar.
• Airless equipment: nozzle 19/40 or 17/40 for smaller moulds, pressure 3.5–4 bar, air assist maximum (6 bars). Due to the relatively small nozzle it is recommended to use an internal filter of 100 mesh at the spray gun.
|
Thousands Chemicalsconducts global business in compliance with brand authorization.We adhere to the brand philosophy and ensure that every product shipped from Thousands Chemicals isGenuine. We are well versed in international hazardous chemical standards and have extensive experience in exporting Class5.2hazardouschemicals,including temperature control products, to ensureSafeandTimelydelivery.
|
EN
AR
HR
CS
DA
NL
FI
FR
DE
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
TL
ID
UK
VI
TH
TR
FA
AF
MS
GA
BE
HY
AZ
KA
LO
MN
MY
KK
SU
TG
UZ
